10. Recording

Vu+ SOLO2 supports multiple recordings up to 8 recording at the same time.


1. Instant Recording
   [ : Press or key]
   Press REC key to start the recording of the current program.
   
   
   
   Five recording options are given.
   
   - Add recording (stop after current event)
   This option is used when you want to end recording when the current program ends.
   
   - Add recording (enter recording duration)
   This option is used when you want to manually set the length of recording by entering a certain number as below:
   
   
   
   - Add recording (enter recording end time)
   This option is used when you want to define a certain date and time when the recording is stopped.
   
   
   
   - Add recording (indefinitely)
   This option is used when you want to keep recording running without a specific end time. Recording will continue unless you stop it.
   
   - Don¡¯t record
   This option is used to exit from this menu without recording.
   
   
2. Recording by Timer
   [ : Press MENU key > Select Timer]
   You can manage recording process using Timer List menu. Press MENU and select Timer on the menu.
   
   
   
   
   
   In this menu, color keys are assigned for each different function.
   
   - RED (Delete)
   This option is used to delete a timer.
   
   - GREEN (Add)
   This option is used to add a timer.
   
   
   
   - YELLOW (Disable)
   This option is used to disable the timer and X mark will appear.
   
   
   
   

   NOTE : if you want to enable the disabled timer, press YELLOW again.

   
   - BLUE (Cleanup)
   This option is used to remove those finished timers from the Timer List
   
   
   
   

   NOTE : Make sure that the HDD on your Vu+ has enough free space available for recording. If the free space on the HDD is not sufficient, recording might stop before the defined end time.

   
   - Stop Recording [ : Press RED key > Select "Stop Recording"]
   If you want to stop recording, press REC again while recording is running. Select Stop Recording.