Dish & Motor Support - Diseqc help | vuplus-images.co.uk

Dish & Motor Support Diseqc help

Joined
Oct 28, 2018
Messages
3
Likes
0
Points
1
#1
Hi all i have a vu+ duo Running openbh 4.1 a Alsat dark motor the problem i have is that the motor says it at 24.3 east when i 1st set it up on .08w 19.2e and 28.2e on the motor it all seemed fine by moving via the motor controls when i then tried it via the stb it moved the dish off 19.2 to the motor led 24.e so i moved the dish on the motor so it was back on 19.2 so te motor and stb are 5 deg out i read the manual and it told me i can get the stb to write its setting to motor

alsat.jpg

alsat.jpg


Now how do i put a shift 0 into the stb do i have to have a telnet program so i can do this if so what program do i need

Thanks for any help Jim
 

Similar threads

Top