Dish Support Fixed & Motorised Dish Settings Needed for Recording

[adrian]

Hi Guys,

can anyone help me with my tuner configuration settings for tuner A +B.

I want to be able to watch and record but not working.

Vu Solo2 with Openvix installed.

Fixed 28.2 dish and Motorised Dish 80cm

Tuner A DVB-S2 advanced 7 satellites with long and latitude set, set using LNB1 using USUALS. ( this also includes 28.2)

Tuner B DVB- S2 single simple 28.2 .

Are these settings correct or can someone point me in the right direction.

thanks

 

[Ten Below]

Hi Guys,

can anyone help me with my tuner configuration settings for tuner A +B.

I want to be able to watch and record but not working.

Vu Solo2 with Openvix installed.

Fixed 28.2 dish and Motorised Dish 80cm

Tuner A DVB-S2 advanced 7 satellites with long and latitude set, set using LNB1 using USUALS. ( this also includes 28.2)

Tuner B DVB- S2 single simple 28.2 .

Are these settings correct or can someone point me in the right direction.

thanks

The same settings have worked for me in the past buddy try setting Tuner B to advanced 28.2E.

 

[adrian]

The same settings have worked for me in the past buddy try setting Tuner B to advanced 28.2E.

Thanks will give it a try, do I have to select 28.2 in tuner A advanced settings also. When I do it only does an automatic scan on tuner A only , but when I take out scans for tuner A +B

 

[jenseneverest]

For me....

Tuner A is 28.2 advanced
Tuner B is usals for the motor
(tuner c and d are cable)

Done that way as i am on 28.2 most of the time.....

If i am scanning i use tuner b only.... IE set manual scan for that tuner and set the required sats to be scanned.

 

[DirtyDonki]

the settings should have tuner B equal to tuner A

 

[Ten Below]

Thanks will give it a try, do I have to select 28.2 in tuner A advanced settings also. When I do it only does an automatic scan on tuner A only , but when I take out scans for tuner A +B

the settings should have tuner B equal to tuner A

This is how i am set now but now have one motorized dish with dual lnb where as before had motor on single lnb & a seperae fixed at 28.2E, once solved we should stick this thread.

 

[adrian]

This is how i am set now but now have one motorized dish with dual lnb where as before had motor on single lnb & a seperae fixed at 28.2E, once solved we should stick this thread.

I have tried all, but no joy. works fine but when I start to record one channel the other stays blank. dish would move but not show. if anyone has a step by step settings for the fixed dish and motorised dish. thanks everyone.

back of box settings LNB1 motorised dish, LNB2 fixed dish.

 

[Ten Below]

I have tried all, but no joy. works fine but when I start to record one channel the other stays blank. dish would move but not show. if anyone has a step by step settings for the fixed dish and motorised dish. thanks everyone.

back of box settings LNB1 motorised dish, LNB2 fixed dish.

Are you trying FTA or paid channels, if paid which softcam & version are you using?

 

[adrian]

Are you trying FTA or paid channels, if paid which softcam & version are you using?

Ten Below you're a genius loool. was using cccam221 changed to 230 and bang its working thanks.

if anyone ever needs help with fixed and motorised dish set-up I will be happy to help.

 

[DirtyDonki]

Glad it's sorted. Thread stuck & closed.