What's new

VU+ Receiver General Setup Questions i have just bought a second hand vu+ duo and would like advice on what image to install .

Joined
Mar 29, 2019
Messages
2
Points
3
this is my first vu+ and would like advice as to what image to use and how to install it . if possible i would like one that looks like sly. i am only used to zgemma in the past so i am hoping they are similar to set up. any help would be much appreciated , many thanks john
 

bmitie

Vuplus-Images Elite
Joined
Dec 11, 2015
Messages
111
Points
18
This is what you need, its called a backup image, you download it, extract it to a usb stick that has been formatted to fat 32, then

Flashing the Receiver. – Fully power the receiver down via the rocker switch at the rear of the receiver. – Make sure no USB devices are plugged into the receiver at this point. – Insert the USB stick containing the image files into one of the USB ports on the receiver. – Power the receiver on from the rear rocker switch and await instructions. As your Duo starts to power up the flash progress should automatically begin with a readout of the progress on the receivers display, just sit tight and wait for the receiver to do it's thing


make sure you use the duo version and take your time.

THAT BOX IS 5 YEARS OLD but good.

enjoy
 
Thread starter Similar threads Forum Replies Date
graphex General Support Questions 0

Top Bottom