Hardware Support is my Cable tuner knackered ?

goofy gorilla

Member
Joined
Jul 16, 2015
Messages
27
Points
3
Age
53
hi guys - ive got a vu+ultimo with 2 cable tuners, 1 is working fine, now when i connect the feed to this other tuner i get no siganl snr is 0%. ive set up a scan for my area, entered the correct frequency, symbol rate ,Fec etc....it finds all channels on network, around 600 plus..but when i exit the scan my snr is still 0% and iget no channels at all....when i take the feed out and put it in the working tuner, its fine all channels work..any ideas ? ta
 

goofy gorilla

Member
Joined
Jul 16, 2015
Messages
27
Points
3
Age
53
ok done another test.....deleted evrything on my ultimo, left in working cable tuner, done a scan on my cable network, used Autoboquets C2 to create boquets and everything is working perfectly, now when i add in my second cable tuner and configure it....i then remove the feed from my working tuner to this one i get absolutely nothing at all on all channels snr is at 0%..even the FTA ones..
 

Banny

Respected Ex Staff
Significant Contributor
Joined
Oct 27, 2014
Messages
1,029
Points
108
Location
North West
disable your working cable tuner, restart and see if it then uses the secondary one.
 

goofy gorilla

Member
Joined
Jul 16, 2015
Messages
27
Points
3
Age
53
sorry guys for the delay been really busy....anyway i removed all tuners from my box, the working cable tuner and the sat tuner. ive put in this secondary tuner only...and everything is working perfectly, the only thing i have noticed is that that the SNR varies between 60%-69% on most of the channels but all working fine....ive tried the cable tuner in each of the 3 slots in my vu+ ultimo and its still working fine...perhaps one of the other tuners is interferring when they are all slotted into the box..
 

Top