Hardware Support Jtag Solution Guide and BBS Tool - Support Thread

[bibo2]

Thanks for Your help, Aliraza63.
I could manage to do the jtag to the vu duo2 (I put the pli backup back int the nand), but without success. The duo2 still does not start it remains in the the position as befor-only white LED.

 

[Aliraza63]

I think it could be another reason to . did u check it without front panel if u see any picture at tv screen?

 

[kirz]

Hello, my Vu +Zero Rev. 2 blinks 4 times and the Led stays on but i have no image. I already try to flash it again but appears that the Zero is not reading the usb.
Is there any possible way to fix this?

 

[Aliraza63]

check it with any other usb

 

[kirz]

I already did with many usb but it don't read it.

 

[cobramostar]

I search for zero 4k and cpu bcm97252 solution write with bbs

Thanks

 

[bibo2]

hi to all,
i need help again. I do have a broken vu solo se v2, the jtag back to live does not work. I intent to write a complete backup e2 via jtag to the box. To reach the Nand with the jtag method is ok. I need therefore ab Imageas .bin.

greetings
bibo2

 

[bibo2]

hi to all,
i need help again. I do have a broken vu solo se v2, the jtag back to live does not work. I intent to write a complete backup e2 via jtag to the box. To reach the Nand with the jtag method is ok. I need therefore an Image as ...bin.

greetings
bibo2

 

[Aliraza63]

hi to all,
i need help again. I do have a broken vu solo se v2, the jtag back to live does not work. I intent to write a complete backup e2 via jtag to the box. To reach the Nand with the jtag method is ok. I need therefore ab Imageas .bin.

greetings
bibo2

Its working & my tested file.

 

[bibo2]

Hi Aliraza63,
thanks for the bootloader, but I tested this one already without success, the only output in the hyperterminal is BCM74290010 and
MOCZ
thats it. Therefore I asked for an enigma2 backup as a bin file to load it complete and see what happend.

 

[sharan94]

@Aliraza63

Suddenly my vu+ duo2 froze, I tried to turn it off and on again but it was left with the solid white led. I bought the cypress and flashed the Samsung with BBS. Unfortunately without results, I always have the steady white light on. I tried flashing it from usb but it doesn't see the port. Before making the flash with bbs I had the writing on the display and solid white light, after the flash with cypress + bbs I have only solid white led and black display.
Can you help me?
Thank's.

 

[Aliraza63]

I think u must study this before to try further

Please, Log in or Register to view URLs content!

 

[bibo2]

Thanks for Your help, Aliraza63.
I could manage to do the jtag to the vu duo2 (I put the pli backup back int the nand), but without success. The duo2 still does not start it remains in the the position as befor-only white LED.

 

[Aliraza63]

I think it could be another reason to . did u check it without front panel if u see any picture at tv screen?

 

[kirz]

Hello, my Vu +Zero Rev. 2 blinks 4 times and the Led stays on but i have no image. I already try to flash it again but appears that the Zero is not reading the usb.
Is there any possible way to fix this?

 

[Aliraza63]

check it with any other usb

 

[kirz]

I already did with many usb but it don't read it.

 

[cobramostar]

I search for zero 4k and cpu bcm97252 solution write with bbs

Thanks

 

[bibo2]

hi to all,
i need help again. I do have a broken vu solo se v2, the jtag back to live does not work. I intent to write a complete backup e2 via jtag to the box. To reach the Nand with the jtag method is ok. I need therefore ab Imageas .bin.

greetings
bibo2

 

[bibo2]

hi to all,
i need help again. I do have a broken vu solo se v2, the jtag back to live does not work. I intent to write a complete backup e2 via jtag to the box. To reach the Nand with the jtag method is ok. I need therefore an Image as ...bin.

greetings
bibo2

 

[Aliraza63]

hi to all,
i need help again. I do have a broken vu solo se v2, the jtag back to live does not work. I intent to write a complete backup e2 via jtag to the box. To reach the Nand with the jtag method is ok. I need therefore ab Imageas .bin.

greetings
bibo2

Its working & my tested file.

 

[bibo2]

Hi Aliraza63,
thanks for the bootloader, but I tested this one already without success, the only output in the hyperterminal is BCM74290010 and
MOCZ
thats it. Therefore I asked for an enigma2 backup as a bin file to load it complete and see what happend.

 

[sharan94]

@Aliraza63

Suddenly my vu+ duo2 froze, I tried to turn it off and on again but it was left with the solid white led. I bought the cypress and flashed the Samsung with BBS. Unfortunately without results, I always have the steady white light on. I tried flashing it from usb but it doesn't see the port. Before making the flash with bbs I had the writing on the display and solid white light, after the flash with cypress + bbs I have only solid white led and black display.
Can you help me?
Thank's.

 

[Aliraza63]

I think u must study this before to try further

Please, Log in or Register to view URLs content!