Custom / Unofficial Build OpenVIX 5.0 vuplus-images Custom Build (All Models)

[st8ph8n]

Thanks Ten, for the update. Where will I find Kodi 17.3 in the extensions cannot seem to find it

 

[Ten Below]

Thanks Ten, for the update. Where will I find Kodi 17.3 in the extensions cannot seem to find it

It is listed as kodi 17.0 but install this and start then you will see it is indeed 17.3 version.

 

[st8ph8n]

I have enclosed a photo shot

 

[Ten Below]

I have enclosed a photo shotView attachment 18022

If you already had kodi installed then the version will have been upgraded already when you did the online update, if you dont have it installed try this in telnet as it is 100% present in the feeds.

Please, Log in or Register to view codes content!

 

[bob]

Loaded the solo 4k image worked ok for a while

Set up sats on my motorized dish all working fine

Went to download image from the panel and crashed .

Rebooted lost all my sats and would not let my install them again only 28.2 could change in tuner config.

I done a factory reset should it have wiped it all.

But the vu panel still come up after resetting should it have reset to factory reset I.E. as delivered.

 

[Ten Below]

Loaded the solo 4k image worked ok for a while

Set up sats on my motorized dish all working fine

Went to download image from the panel and crashed .

Rebooted lost all my sats and would not let my install them again only 28.2 could change in tuner config.

I done a factory reset should it have wiped it all.

But the vu panel still come up after resetting should it have reset to factory reset I.E. as delivered.

The panel is built into this image so will remain after factory reset, taking a settings backup is always a good idea before installing anything new though i'm at a loss to explain how using the image downloader could break your installed image.

 

[bob]

I have flashed a standard openvix image all went well.

Loaded sky skin and oscam .

Will load more addons later can't get at the telly the other half is watching her soaps

 

[soufiane87]

Great to the test hope it's good as the last one

 

[juquin]

Great to the test hope it's good as the last one

box crashes when i press 'Menu' from the service list to set a channel as a Startup Service. by going to service list and then pressing menu should take me to a Channel List Context Menu from where i should set a service as a start up service

 

[4u2no]

Hi all, I'm trying to do an online update on a solo2 but I'm getting error that there's not enough space. I know there is space cus I've deleted loads of recordings and emptied the recycle bin. How can I change the download location?

Thanks

 

[Ten Below]

Hi all, I'm trying to do an online update on a solo2 but I'm getting error that there's not enough space. I know there is space cus I've deleted loads of recordings and emptied the recycle bin. How can I change the download location?

Thanks

It probably means not enough space in flash rather than your hdd, backup your settings flash the latest version then do a restore.

 

[4u2no]

Thank you, all sorted.

 

[sarah]

I'm having an issue with plugins. when I go download plugins there is nothing there, I've rebooted numerous times with no success.

 

[Ten Below]

I'm having an issue with plugins. when I go download plugins there is nothing there, I've rebooted numerous times with no success.

Which box are you using Sarah?

 

[sarah]

vu+ solo2

 

[Ten Below]

vu+ solo2

Should be working now, if not please enter the following in telnet & report any non working link.

Please, Log in or Register to view codes content!

 

[sarah]

its working now thanks a mill :0)

 

[scousemicky]

Hi, Just installed this image. Looks good. One problem I'm having is that the volume is very low. I need to turn volume up very very high on my TV to get a decent volume. I've not had this issue on any other images. Any way to fix this? Thanks

 

[Ten Below]

Hi, Just installed this image. Looks good. One problem I'm having is that the volume is very low. I need to turn volume up very very high on my TV to get a decent volume. I've not had this issue on any other images. Any way to fix this? Thanks

Connect to the webinfo page & see if it can be turned up there.

 

[scousemicky]

That worked! Thank you very much - Appreciated

 

[st8ph8n]

Thanks Ten, for the update. Where will I find Kodi 17.3 in the extensions cannot seem to find it

 

[Ten Below]

Thanks Ten, for the update. Where will I find Kodi 17.3 in the extensions cannot seem to find it

It is listed as kodi 17.0 but install this and start then you will see it is indeed 17.3 version.

 

[st8ph8n]

I have enclosed a photo shot

 

[Ten Below]

I have enclosed a photo shotView attachment 18022

If you already had kodi installed then the version will have been upgraded already when you did the online update, if you dont have it installed try this in telnet as it is 100% present in the feeds.

Please, Log in or Register to view codes content!

 

[bob]

Loaded the solo 4k image worked ok for a while

Set up sats on my motorized dish all working fine

Went to download image from the panel and crashed .

Rebooted lost all my sats and would not let my install them again only 28.2 could change in tuner config.

I done a factory reset should it have wiped it all.

But the vu panel still come up after resetting should it have reset to factory reset I.E. as delivered.

 

[Ten Below]

Loaded the solo 4k image worked ok for a while

Set up sats on my motorized dish all working fine

Went to download image from the panel and crashed .

Rebooted lost all my sats and would not let my install them again only 28.2 could change in tuner config.

I done a factory reset should it have wiped it all.

But the vu panel still come up after resetting should it have reset to factory reset I.E. as delivered.

The panel is built into this image so will remain after factory reset, taking a settings backup is always a good idea before installing anything new though i'm at a loss to explain how using the image downloader could break your installed image.

 

[bob]

I have flashed a standard openvix image all went well.

Loaded sky skin and oscam .

Will load more addons later can't get at the telly the other half is watching her soaps

 

[soufiane87]

Great to the test hope it's good as the last one

 

[juquin]

Great to the test hope it's good as the last one

box crashes when i press 'Menu' from the service list to set a channel as a Startup Service. by going to service list and then pressing menu should take me to a Channel List Context Menu from where i should set a service as a start up service

 

[4u2no]

Hi all, I'm trying to do an online update on a solo2 but I'm getting error that there's not enough space. I know there is space cus I've deleted loads of recordings and emptied the recycle bin. How can I change the download location?

Thanks

 

[Ten Below]

Hi all, I'm trying to do an online update on a solo2 but I'm getting error that there's not enough space. I know there is space cus I've deleted loads of recordings and emptied the recycle bin. How can I change the download location?

Thanks

It probably means not enough space in flash rather than your hdd, backup your settings flash the latest version then do a restore.

 

[4u2no]

Thank you, all sorted.

 

[sarah]

I'm having an issue with plugins. when I go download plugins there is nothing there, I've rebooted numerous times with no success.

 

[Ten Below]

I'm having an issue with plugins. when I go download plugins there is nothing there, I've rebooted numerous times with no success.

Which box are you using Sarah?

 

[sarah]

vu+ solo2

 

[Ten Below]

vu+ solo2

Should be working now, if not please enter the following in telnet & report any non working link.

Please, Log in or Register to view codes content!

 

[sarah]

its working now thanks a mill :0)

 

[scousemicky]

Hi, Just installed this image. Looks good. One problem I'm having is that the volume is very low. I need to turn volume up very very high on my TV to get a decent volume. I've not had this issue on any other images. Any way to fix this? Thanks

 

[Ten Below]

Hi, Just installed this image. Looks good. One problem I'm having is that the volume is very low. I need to turn volume up very very high on my TV to get a decent volume. I've not had this issue on any other images. Any way to fix this? Thanks

Connect to the webinfo page & see if it can be turned up there.

 

[scousemicky]

That worked! Thank you very much - Appreciated