VU+Solo2 Clone Sunray Images OpenVIX Apollo Backup ($ky looking setup) - Sunray Solo2

[Ten Below]

Vix Apollo 131 (for Sunray Solo2)
Sky looking setup



Source Date: 25/01/15
Kernel: 3.13.5
Drivers: 09/01/15 (patched)



This is backup of OpenVix Apollo designed to mimic $ky where possible. I have added TSMedia, Picons and MGGcamD 1.38 (along with mg_cfg config file), BlueHD v3.1 skin and Sky 'Believe in Better' bootlogo. I have setup timeshift to closely mimic $ky+ as possible.

I recommend backing up your current image first before flashing with this image.







Updating is possible, but keep in mind future driver releases/updates may harm your box. This image has the driver version patch and drivers write-protected already to reduce (but not guarantee) likelyhood of drivers being replaced during an update. Any updates done are at your own risk!

Credit goes to Sim2/Sunray team (with special thanks to RamiMAHER for the patched drivers and Gjstroom for patching driver version).

Thanks also go to Rossi2000 for the BlueHD skin and whomever designed the bootlogo. Any copyright is hereby acknowledged.

This image has only been tested on Sunray Solo2 clones. Use on any other clones may result in a bricked box. Use at your own risk!​

 

[Ten Below]

Vix Apollo 142 With XBMC (for Sunray Solo2)
Sky looking setup

Source Date: 09/02/15
Kernel: 3.13.5
Drivers: Current XBMC (patched)



This is backup of OpenVix Apollo designed to mimic $ky where possible. I have added TSMedia, Picons and MGGcamD 1.38 (along with mg_cfg config file), BlueHD v3.1 skin and Sky 'Believe in Better' bootlogo. I have setup timeshift to closely mimic $ky+ as possible.

I recommend backing up your current image first before flashing with this image.


Updating is possible, but keep in mind future driver releases/updates may harm your box. This image has the driver version patch and drivers write-protected already to reduce (but not guarantee) likelyhood of drivers being replaced during an update. Any updates done are at your own risk!

Credit goes to Sim2/Sunray team (with special thanks to RamiMAHER for the patched drivers and Gjstroom for patching driver version).

Thanks also go to Rossi2000 for the BlueHD skin and whomever designed the bootlogo. Any copyright is hereby acknowledged.

This image has only been tested on Sunray Solo2 clones. Use on any other clones may result in a bricked box. Use at your own risk!​

 

[Ten Below]

OpenVix Apollo 152 with XBMC (for Sunray Solo2)
Sky looking setup

Source Date: 01/03/15
Kernel: 3.13.5
Drivers: Current XBMC drivers (patched)​

This is backup of OpenVix Apollo designed to mimic $ky where possible. I have added TSMedia, Picons and MGGcamD 1.38 (along with mg_cfg config file), BlueHD v3.1 skin and Sky 'Believe in Better' bootlogo. I have setup timeshift to closely mimic $ky+ as possible.

XBMC (currently beta) is available via the plugin feeds and the "Sky UK (SD)" provider within Auto Bouquet Maker (ABM) has been modified and now includes Irish channels like Setanta Ireland and Setanta Sports 1 within relevant section (eg Sports) of Sky UK.

I recommend backing up your current image first before flashing with this image.

Updating is possible, but keep in mind future driver releases/updates may harm your box. This image has the driver version patch and drivers write-protected already to reduce (but not guarantee) likelyhood of drivers being replaced during an update. Any updates done are at your own risk!

Credit goes to Sim2/Sunray team (with special thanks to RamiMAHER for the patched xbmc drivers and Gjstroom for patching driver version).

Thanks also go to Rossi2000 for the BlueHD skin and whomever designed the bootlogo. Any copyright is hereby acknowledged.

This image has only been tested on Sunray Solo2 clones. Use on any other clones may result in a bricked box. Use at your own risk!​

 

[woodydogs]

OpenVix Apollo 152 with XBMC (for Sunray Solo2)
Sky looking setup

Source Date: 01/03/15
Kernel: 3.13.5
Drivers: Current XBMC drivers (patched)


This is backup of OpenVix Apollo designed to mimic $ky where possible. I have added TSMedia, Picons and MGGcamD 1.38 (along with mg_cfg config file), BlueHD v3.1 skin and Sky 'Believe in Better' bootlogo. I have setup timeshift to closely mimic $ky+ as possible.

XBMC (currently beta) is available via the plugin feeds and the "Sky UK (SD)" provider within Auto Bouquet Maker (ABM) has been modified and now includes Irish channels like Setanta Ireland and Setanta Sports 1 within relevant section (eg Sports) of Sky UK.

I recommend backing up your current image first before flashing with this image.

Updating is possible, but keep in mind future driver releases/updates may harm your box. This image has the driver version patch and drivers write-protected already to reduce (but not guarantee) likelyhood of drivers being replaced during an update. Any updates done are at your own risk!

Credit goes to Sim2/Sunray team (with special thanks to RamiMAHER for the patched xbmc drivers and Gjstroom for patching driver version).

Thanks also go to Rossi2000 for the BlueHD skin and whomever designed the bootlogo. Any copyright is hereby acknowledged.

This image has only been tested on Sunray Solo2 clones. Use on any other clones may result in a bricked box. Use at your own risk!​

hi thanks for your help yesterday
will this image work on my vu+solo2

 

[Ten Below]

hi thanks for your help yesterday
will this image work on my vu+solo2

No this is for clone models, original Solo2 backups are here buddy.
VU+ Solo2 Backup Images

 

[woodydogs]

No this is for clone models, original Solo2 backups are here buddy.
VU+ Solo2 Backup Images

thanks am looking for an image that look like sky or as close as

 

[Ten Below]

thanks am looking for an image that look like sky or as close as

There are a few options but my personal choice would be flash an OpenATV image then install this skin.
http://vuplus-images.co.uk/index.php?threads/frankensky-by-fraggle121.1180/

 

[Enam Ali]

why is it not working just shows black screen after fresh install

 

[zool]

can any body tell me if this image will work on a VU+ solo2se (the mini version)? if not can somebody point me in the right direction thanks in advance

 

[Banny]

Id be cautious of flashing a clone model with any image unless it has been confirmed as clone safe, the reason I say this... (worse case scenario of course), is that you brick your receiver. I can only suggest you either seek out an image that has been tested and confirmed as safe with the Solo2SE, or somebody who has experience with this receiver.

The best advice I can give you is -

What image are you using at present?

I am assuming the 'attraction' to this image is the fact it has been made to work and look like the Offical S*y UK Receivers, the main part of this is the skin used, id suggest making a backup of your current image and config files, then installing and using the skin (which according to the first post is BlueHD v3.1 skin), until you get further advice.

I know it doesn't directly answer your question, but hopefully a workable solution, till someone better informed is able to pickup on your question.

 

[zool]

thanks for that i assumed as this was for a sunray solo2 (clone) which is pretty much the same as the solo2se mini but with a screen and bigger box. its a friends box currently running a similar vix image with the same skin etc its just become very glitchy as they do and wanted to do a full restore to a newer backup.

 

[Banny]

Ahh my bad thought it was in the solo2 image section... :/

From what I read Solo2 images have been used on the Solo2se receivers in the past, but couldn't find any recent ones saying that you should or should not...

 

[Ten Below]

Vix Apollo 131 (for Sunray Solo2)
Sky looking setup



Source Date: 25/01/15
Kernel: 3.13.5
Drivers: 09/01/15 (patched)



This is backup of OpenVix Apollo designed to mimic $ky where possible. I have added TSMedia, Picons and MGGcamD 1.38 (along with mg_cfg config file), BlueHD v3.1 skin and Sky 'Believe in Better' bootlogo. I have setup timeshift to closely mimic $ky+ as possible.

I recommend backing up your current image first before flashing with this image.







Updating is possible, but keep in mind future driver releases/updates may harm your box. This image has the driver version patch and drivers write-protected already to reduce (but not guarantee) likelyhood of drivers being replaced during an update. Any updates done are at your own risk!

Credit goes to Sim2/Sunray team (with special thanks to RamiMAHER for the patched drivers and Gjstroom for patching driver version).

Thanks also go to Rossi2000 for the BlueHD skin and whomever designed the bootlogo. Any copyright is hereby acknowledged.

This image has only been tested on Sunray Solo2 clones. Use on any other clones may result in a bricked box. Use at your own risk!​

 

[Ten Below]

Vix Apollo 142 With XBMC (for Sunray Solo2)
Sky looking setup

Source Date: 09/02/15
Kernel: 3.13.5
Drivers: Current XBMC (patched)



This is backup of OpenVix Apollo designed to mimic $ky where possible. I have added TSMedia, Picons and MGGcamD 1.38 (along with mg_cfg config file), BlueHD v3.1 skin and Sky 'Believe in Better' bootlogo. I have setup timeshift to closely mimic $ky+ as possible.

I recommend backing up your current image first before flashing with this image.


Updating is possible, but keep in mind future driver releases/updates may harm your box. This image has the driver version patch and drivers write-protected already to reduce (but not guarantee) likelyhood of drivers being replaced during an update. Any updates done are at your own risk!

Credit goes to Sim2/Sunray team (with special thanks to RamiMAHER for the patched drivers and Gjstroom for patching driver version).

Thanks also go to Rossi2000 for the BlueHD skin and whomever designed the bootlogo. Any copyright is hereby acknowledged.

This image has only been tested on Sunray Solo2 clones. Use on any other clones may result in a bricked box. Use at your own risk!​

 

[Ten Below]

OpenVix Apollo 152 with XBMC (for Sunray Solo2)
Sky looking setup

Source Date: 01/03/15
Kernel: 3.13.5
Drivers: Current XBMC drivers (patched)​

This is backup of OpenVix Apollo designed to mimic $ky where possible. I have added TSMedia, Picons and MGGcamD 1.38 (along with mg_cfg config file), BlueHD v3.1 skin and Sky 'Believe in Better' bootlogo. I have setup timeshift to closely mimic $ky+ as possible.

XBMC (currently beta) is available via the plugin feeds and the "Sky UK (SD)" provider within Auto Bouquet Maker (ABM) has been modified and now includes Irish channels like Setanta Ireland and Setanta Sports 1 within relevant section (eg Sports) of Sky UK.

I recommend backing up your current image first before flashing with this image.

Updating is possible, but keep in mind future driver releases/updates may harm your box. This image has the driver version patch and drivers write-protected already to reduce (but not guarantee) likelyhood of drivers being replaced during an update. Any updates done are at your own risk!

Credit goes to Sim2/Sunray team (with special thanks to RamiMAHER for the patched xbmc drivers and Gjstroom for patching driver version).

Thanks also go to Rossi2000 for the BlueHD skin and whomever designed the bootlogo. Any copyright is hereby acknowledged.

This image has only been tested on Sunray Solo2 clones. Use on any other clones may result in a bricked box. Use at your own risk!​

 

[woodydogs]

OpenVix Apollo 152 with XBMC (for Sunray Solo2)
Sky looking setup

Source Date: 01/03/15
Kernel: 3.13.5
Drivers: Current XBMC drivers (patched)


This is backup of OpenVix Apollo designed to mimic $ky where possible. I have added TSMedia, Picons and MGGcamD 1.38 (along with mg_cfg config file), BlueHD v3.1 skin and Sky 'Believe in Better' bootlogo. I have setup timeshift to closely mimic $ky+ as possible.

XBMC (currently beta) is available via the plugin feeds and the "Sky UK (SD)" provider within Auto Bouquet Maker (ABM) has been modified and now includes Irish channels like Setanta Ireland and Setanta Sports 1 within relevant section (eg Sports) of Sky UK.

I recommend backing up your current image first before flashing with this image.

Updating is possible, but keep in mind future driver releases/updates may harm your box. This image has the driver version patch and drivers write-protected already to reduce (but not guarantee) likelyhood of drivers being replaced during an update. Any updates done are at your own risk!

Credit goes to Sim2/Sunray team (with special thanks to RamiMAHER for the patched xbmc drivers and Gjstroom for patching driver version).

Thanks also go to Rossi2000 for the BlueHD skin and whomever designed the bootlogo. Any copyright is hereby acknowledged.

This image has only been tested on Sunray Solo2 clones. Use on any other clones may result in a bricked box. Use at your own risk!​

hi thanks for your help yesterday
will this image work on my vu+solo2

 

[Ten Below]

hi thanks for your help yesterday
will this image work on my vu+solo2

No this is for clone models, original Solo2 backups are here buddy.
VU+ Solo2 Backup Images

 

[woodydogs]

No this is for clone models, original Solo2 backups are here buddy.
VU+ Solo2 Backup Images

thanks am looking for an image that look like sky or as close as

 

[Ten Below]

thanks am looking for an image that look like sky or as close as

There are a few options but my personal choice would be flash an OpenATV image then install this skin.
http://vuplus-images.co.uk/index.php?threads/frankensky-by-fraggle121.1180/

 

[Enam Ali]

why is it not working just shows black screen after fresh install

 

[zool]

can any body tell me if this image will work on a VU+ solo2se (the mini version)? if not can somebody point me in the right direction thanks in advance

 

[Banny]

Id be cautious of flashing a clone model with any image unless it has been confirmed as clone safe, the reason I say this... (worse case scenario of course), is that you brick your receiver. I can only suggest you either seek out an image that has been tested and confirmed as safe with the Solo2SE, or somebody who has experience with this receiver.

The best advice I can give you is -

What image are you using at present?

I am assuming the 'attraction' to this image is the fact it has been made to work and look like the Offical S*y UK Receivers, the main part of this is the skin used, id suggest making a backup of your current image and config files, then installing and using the skin (which according to the first post is BlueHD v3.1 skin), until you get further advice.

I know it doesn't directly answer your question, but hopefully a workable solution, till someone better informed is able to pickup on your question.

 

[zool]

thanks for that i assumed as this was for a sunray solo2 (clone) which is pretty much the same as the solo2se mini but with a screen and bigger box. its a friends box currently running a similar vix image with the same skin etc its just become very glitchy as they do and wanted to do a full restore to a newer backup.

 

[Banny]

Ahh my bad thought it was in the solo2 image section... :/

From what I read Solo2 images have been used on the Solo2se receivers in the past, but couldn't find any recent ones saying that you should or should not...