What's new

Recording & Timers Support Recording faults

Shireoaks Owl

Member
Messages
17
Joined
Oct 15, 2020
Reaction score
1
Points
3
Hi Guys I have a vu+uno4kse box and I had trouble trying to load soft cams when using atv 6.4 . So I changed to openvix and this rectified my fault, but since the re- flash my box will not record. The message that I keep getting is: Missing No HDD found or HDD not initialised. Could anybody give me any help on how to rectify my problem
 

DirtyDonki

I am the Nice One
Staff member
Admin
Messages
26,140
Joined
Sep 10, 2014
Reaction score
3,370
Points
728
Hi Guys I have a vu+uno4kse box and I had trouble trying to load soft cams when using atv 6.4 . So I changed to openvix and this rectified my fault, but since the re- flash my box will not record. The message that I keep getting is: Missing No HDD found or HDD not initialised. Could anybody give me any help on how to rectify my problem
Install a HDD & mount it.
 

Shireoaks Owl

Member
Messages
17
Joined
Oct 15, 2020
Reaction score
1
Points
3
Thank you for your reply, can you explain more how to install HDD and mount it
 

DirtyDonki

I am the Nice One
Staff member
Admin
Messages
26,140
Joined
Sep 10, 2014
Reaction score
3,370
Points
728
Thank you for your reply, can you explain more how to install HDD and mount it
1. Pull out the caddy at the back.
2. Fix an appropriate HDD to it.
3. Restart your box.
4. If it does not mount automatically then hit Menu - Setup - System - Device Manager & mount it there.
5. Initialize it as ext4
6. Job done.

If you have the user manual handy it actually tells you all of this and more. :mutley:
 

Shireoaks Owl

Member
Messages
17
Joined
Oct 15, 2020
Reaction score
1
Points
3
1. Pull out the caddy at the back.
2. Fix an appropriate HDD to it.
3. Restart your box.
4. If it does not mount automatically then hit Menu - Setup - System - Device Manager & mount it there.
5. Initialize it as ext4
6. Job done.

If you have the user manual handy it actually tells you all of this and more. :mutley:
Thanks for reply but still having problems, I have followed your instructions and when I go to menu-set-system I then don 't have Device Manager Box. When I followed your instructions when I go to menu I can see storage device, it then ask me to initialize. When I do this a screen comes up with Job View -Initializing storage device .... Creating filesystem -screen starts to load until it gets to 51/100 then it seems to freeze.
I did down load a manaul but could not see were it tells you how to load a HDD
 

DirtyDonki

I am the Nice One
Staff member
Admin
Messages
26,140
Joined
Sep 10, 2014
Reaction score
3,370
Points
728
Thanks for reply but still having problems, I have followed your instructions and when I go to menu-set-system I then don 't have Device Manager Box. When I followed your instructions when I go to menu I can see storage device, it then ask me to initialize. When I do this a screen comes up with Job View -Initializing storage device .... Creating filesystem -screen starts to load until it gets to 51/100 then it seems to freeze.
I did down load a manaul but could not see were it tells you how to load a HDD
To mount.....BLUE, MOUNTS, DEVICE MANAGER, select drive, GREEN, BLUE
To initialise.....BLUE, HARDDISKS, INITIALISATION, select drive and then OK (this formats the disk so use caution)
To convert Ext3 to Ext4 ........BLUE, HARDDISKS, CONVERT EXT3 to EXT4, select drive and OK
 
Last edited:

Shireoaks Owl

Member
Messages
17
Joined
Oct 15, 2020
Reaction score
1
Points
3
I have done that but initializing stops at 51/100

I have gone to Setup, VIX and Mount Manager-this is the error code that I am getting 65280
 

DirtyDonki

I am the Nice One
Staff member
Admin
Messages
26,140
Joined
Sep 10, 2014
Reaction score
3,370
Points
728
Not a SSHD is it?
 

DirtyDonki

I am the Nice One
Staff member
Admin
Messages
26,140
Joined
Sep 10, 2014
Reaction score
3,370
Points
728
I'd be inclined to remove it & repartition & format it in a PC before trying again.
 

Top Bottom