Recording & Timers Support - Vu solo se v2 HD problem | vuplus-images.co.uk

Recording & Timers Support Vu solo se v2 HD problem

Tridens

V.I.P Member
Joined
Feb 24, 2016
Messages
38
Likes
2
Points
8
#1
Hi I'm using vu solo se v2 when I try to initialise my HD it fails to write files and my USB stick is not recognised at all also is usb 2 better or e-sata connection
Thanks
 

DirtyDonki

I am the Nice One
Staff member
Admin
Joined
Sep 10, 2014
Messages
25,276
Likes
1,839
Points
728
Location
Middle England, Planet Earth.
Website
www.metalarmy.net
#2
Check the mounts are set as desired & adjust as required. For example I suspect the HDD is being mounted as media/usb/ which would explain why you are not seeing the stick but I would actually expect that to be seen with some other label perhaps. So suggest you find what the HDD is mount as and remount it as media/hdd. The mount the USB stick as media/usb.
 

Tridens

V.I.P Member
Joined
Feb 24, 2016
Messages
38
Likes
2
Points
8
#3
Hi sorry for asking what do you mean Mount's is that settings system setup hard drive
Thanks
 

DirtyDonki

I am the Nice One
Staff member
Admin
Joined
Sep 10, 2014
Messages
25,276
Likes
1,839
Points
728
Location
Middle England, Planet Earth.
Website
www.metalarmy.net
#4
Hi sorry for asking what do you mean Mount's is that settings system setup hard drive
Thanks
No. It is found within Device Manager-Mounts Setup (Green Button). On ATV this is under BLUE-Mounts-Device Manager.
upload_2017-6-6_12-12-24.png
upload_2017-6-6_12-11-36.png
 

Tridens

V.I.P Member
Joined
Feb 24, 2016
Messages
38
Likes
2
Points
8
#5
Found it device manager blue panel my disk must be faulty it wasn't showing in mounts point but showing as not mounted in disk managment swapped disk worked 1st time

Thanks Dirt Donkey
 

Top