Custom / Unofficial Build OpenDonki 4.2 (Updated 24/08/2018 )

[DirtyDonki]

Try these as I know they work on 4.2 because I am using them myself.

https://vuplus-images.co.uk/index.php?attachments/dirtydonki-vh-uk-mod-e2-motor-02-may-zip.22734/

 

[paulus]

Thanks for helping DD, but they are the same. It's clearly not the channel list but (as the screen message says) the tuner configuration. However, the tuner is set up EXACTLY as ever - see (blurred) photos

 

[paulus]

Just some further info - but I don't understand why at all:

The error message selecting any channel:




While my channel list looks like this:


But (as above) tuner config is identical to OBH4.1 which works perfectly!! What could be wrong?

 

[paulus]

Unless there is something wrong with the build for Solo2 I am doomed to stay on 4.1 then.

 

[Nikita5]

Your decision is right, I did the same to stay on 4.1 before. (for Vu + Zero)

 

[makbar]

Hi All
I am having some problem with 4.2 aswell.
I use TURKVOD plug-in with OBH was working fine with 4.1
now when i install it does not work.
Tried my stored and from other sources as well but not work.

any 1 else having or have fix please let me know

 

[Ten Below]

Thanks for helping DD, but they are the same. It's clearly not the channel list but (as the screen message says) the tuner configuration. However, the tuner is set up EXACTLY as ever - see (blurred) View attachment 22723 View attachment 22724 photos

I think the problem lies with your satellites.xml file, i used ABM to generate my bouquets and had no problems at all from day one. I have seen this issue with catseye settings & bh images before when i did use them.

 

[paulus]

Thanks TenBelow - I would like to get to 4.2 if possible, always used catseyes, never had a problem. Ran my usual (Autobouquets E2) and all UK channels appeared, but all other satellite channels "n/a". Never used ABM but have found it on the menu, what settings etc do I need and will this replace all the bouquets set up within catseyes (which I am familiar with). Thanks again for your guidance.

 

[Nikita5]

If problem lies with satellites.xml file (at first after version 4.1 I) I had scanning problem too !

 

[DirtyDonki]

If problem lies with satellites.xml file (at first after version 4.1 I) I had scanning problem too !

https://vuplus-images.co.uk/index.p...4-2-for-all-vu-models.31188/page-3#post-91173

 

[paulus]

DD - as stated earlier your channel list does not solve the problem. If the problem lies with satellites.xml then what has changed - all versions up to 4.2 worked flawlessly with provided channel lists (catseyes, etc), but now seem to need ABM to fix the satellites.xml??

 

[oktay35]

Hi All
I am having some problem with 4.2 aswell.
I use TURKVOD plug-in with OBH was working fine with 4.1
now when i install it does not work.
Tried my stored and from other sources as well but not work.

any 1 else having or have fix please let me know

hello
try
TURKvod_OE2.2_OE2.5_8.0-r1
it work fine whith me.
.

 

[Ten Below]

DD - as stated earlier your channel list does not solve the problem. If the problem lies with satellites.xml then what has changed - all versions up to 4.2 worked flawlessly with provided channel lists (catseyes, etc), but now seem to need ABM to fix the satellites.xml??

I have just tested this with both the latest Dirty Donki & Catseye motor settings, no problems with either.

DirtyDonki


Catseye


Loaded using the latest E-Channelizer so try using this buddy as cannot work out why you are having these issues.

 

[paulus]

DD - sorry to be a pain, I don't understand why this no longer works either. The problem would appear to be with VCC and some change in the format of either satellites.xml or lamedb for 4.2? I loaded the same file (catseyes) with E-Channelizer and all channels now working OK. Interestingly, trying to retrieve the settings backup from 4.1 also threw up an "incompatible file" error, which would indicate some change going to 4.2.

 

[Ten Below]

DD - sorry to be a pain, I don't understand why this no longer works either. The problem would appear to be with VCC and some change in the format of either satellites.xml or lamedb for 4.2? I loaded the same file (catseyes) with E-Channelizer and all channels now working OK. Interestingly, trying to retrieve the settings backup from 4.1 also threw up an "incompatible file" error, which would indicate some change going to 4.2.

When moving to a new branch it is recommended to start fresh rather than restore old settings so this could be your problem although i had no issues myself.

 

[Ten Below]

Image Updated 02/06/2018



OpenDonki 4.2.0.30, new builds attached to post #1.

 

[jp mumbiny]

Hi Ten, thanks for very great work, unfortunately Oscam not working for Vu+solo 4k

 

[DirtyDonki]

Hi Ten, thanks for very great work, unfortunately Oscam not working for Vu+solo 4k

How do you mean 'not working'?

Works fine here on Ultimo 4K. Please provide more details. :thanx:

 

[jp mumbiny]

Hi Ten ,
thanks for quick reply. I can't find Oscam Config. I have downloaded Oscam and Cfg oscam from plugins download but when I tried to config Sealion by var/etc/tutox...nothing is displayed as oscam.
Best regard

 

[DirtyDonki]

Hi JP

Configs usually sit in:

Please, Log in or Register to view codes content!

Sometimes the oscam install used may use a version specific folder e.g.:

Please, Log in or Register to view codes content!

 

[DirtyDonki]

Try these as I know they work on 4.2 because I am using them myself.

https://vuplus-images.co.uk/index.php?attachments/dirtydonki-vh-uk-mod-e2-motor-02-may-zip.22734/

 

[paulus]

Thanks for helping DD, but they are the same. It's clearly not the channel list but (as the screen message says) the tuner configuration. However, the tuner is set up EXACTLY as ever - see (blurred) photos

 

[paulus]

Just some further info - but I don't understand why at all:

The error message selecting any channel:




While my channel list looks like this:


But (as above) tuner config is identical to OBH4.1 which works perfectly!! What could be wrong?

 

[paulus]

Unless there is something wrong with the build for Solo2 I am doomed to stay on 4.1 then.

 

[Nikita5]

Your decision is right, I did the same to stay on 4.1 before. (for Vu + Zero)

 

[makbar]

Hi All
I am having some problem with 4.2 aswell.
I use TURKVOD plug-in with OBH was working fine with 4.1
now when i install it does not work.
Tried my stored and from other sources as well but not work.

any 1 else having or have fix please let me know

 

[Ten Below]

Thanks for helping DD, but they are the same. It's clearly not the channel list but (as the screen message says) the tuner configuration. However, the tuner is set up EXACTLY as ever - see (blurred) View attachment 22723 View attachment 22724 photos

I think the problem lies with your satellites.xml file, i used ABM to generate my bouquets and had no problems at all from day one. I have seen this issue with catseye settings & bh images before when i did use them.

 

[paulus]

Thanks TenBelow - I would like to get to 4.2 if possible, always used catseyes, never had a problem. Ran my usual (Autobouquets E2) and all UK channels appeared, but all other satellite channels "n/a". Never used ABM but have found it on the menu, what settings etc do I need and will this replace all the bouquets set up within catseyes (which I am familiar with). Thanks again for your guidance.

 

[Nikita5]

If problem lies with satellites.xml file (at first after version 4.1 I) I had scanning problem too !

 

[DirtyDonki]

If problem lies with satellites.xml file (at first after version 4.1 I) I had scanning problem too !

https://vuplus-images.co.uk/index.p...4-2-for-all-vu-models.31188/page-3#post-91173

 

[paulus]

DD - as stated earlier your channel list does not solve the problem. If the problem lies with satellites.xml then what has changed - all versions up to 4.2 worked flawlessly with provided channel lists (catseyes, etc), but now seem to need ABM to fix the satellites.xml??

 

[oktay35]

Hi All
I am having some problem with 4.2 aswell.
I use TURKVOD plug-in with OBH was working fine with 4.1
now when i install it does not work.
Tried my stored and from other sources as well but not work.

any 1 else having or have fix please let me know

hello
try
TURKvod_OE2.2_OE2.5_8.0-r1
it work fine whith me.
.

 

[Ten Below]

DD - as stated earlier your channel list does not solve the problem. If the problem lies with satellites.xml then what has changed - all versions up to 4.2 worked flawlessly with provided channel lists (catseyes, etc), but now seem to need ABM to fix the satellites.xml??

I have just tested this with both the latest Dirty Donki & Catseye motor settings, no problems with either.

DirtyDonki


Catseye


Loaded using the latest E-Channelizer so try using this buddy as cannot work out why you are having these issues.

 

[paulus]

DD - sorry to be a pain, I don't understand why this no longer works either. The problem would appear to be with VCC and some change in the format of either satellites.xml or lamedb for 4.2? I loaded the same file (catseyes) with E-Channelizer and all channels now working OK. Interestingly, trying to retrieve the settings backup from 4.1 also threw up an "incompatible file" error, which would indicate some change going to 4.2.

 

[Ten Below]

DD - sorry to be a pain, I don't understand why this no longer works either. The problem would appear to be with VCC and some change in the format of either satellites.xml or lamedb for 4.2? I loaded the same file (catseyes) with E-Channelizer and all channels now working OK. Interestingly, trying to retrieve the settings backup from 4.1 also threw up an "incompatible file" error, which would indicate some change going to 4.2.

When moving to a new branch it is recommended to start fresh rather than restore old settings so this could be your problem although i had no issues myself.

 

[Ten Below]

Image Updated 02/06/2018



OpenDonki 4.2.0.30, new builds attached to post #1.

 

[jp mumbiny]

Hi Ten, thanks for very great work, unfortunately Oscam not working for Vu+solo 4k

 

[DirtyDonki]

Hi Ten, thanks for very great work, unfortunately Oscam not working for Vu+solo 4k

How do you mean 'not working'?

Works fine here on Ultimo 4K. Please provide more details. :thanx:

 

[jp mumbiny]

Hi Ten ,
thanks for quick reply. I can't find Oscam Config. I have downloaded Oscam and Cfg oscam from plugins download but when I tried to config Sealion by var/etc/tutox...nothing is displayed as oscam.
Best regard

 

[DirtyDonki]

Hi JP

Configs usually sit in:

Please, Log in or Register to view codes content!

Sometimes the oscam install used may use a version specific folder e.g.:

Please, Log in or Register to view codes content!