Custom / Unofficial Build OpenATV 6.1 Custom Build (All VU+ Models)

[Ten Below]

Just installed the build,didn't change anything but they are not there.

Possibly you are using service reference (SRP) picons, try adding a service named (SNP) set to your picon folder this will not affect your current set.

 

[unisat]

Am an owner of Vu+Ultimo 4K. I use IPTV extensively. Tried numerous images and found the best image for IPTV is Openatv 6.1.
I was attracted by your Custom Build openatv 6.1 especially because it has GStreamer 1.13.0. Installed your custom build image hoping to see the impact of the GSteamer 1.13.0 on IPTV performance on the device. I can not see any difference between IPTV performance using your custom Build image and the original Openatv 6.1. Am I missing anything here. pls advise. Please note am a newbie when it comes to streaming.
Thanks in advance.

 

[DirtyDonki]

Am an owner of Vu+Ultimo 4K. I use IPTV extensively. Tried numerous images and found the best image for IPTV is Openatv 6.1.
I was attracted by your Custom Build openatv 6.1 especially because it has GStreamer 1.13.0. Installed your custom build image hoping to see the impact of the GSteamer 1.13.0 on IPTV performance on the device. I can not see any difference between IPTV performance using your custom Build image and the original Openatv 6.1. Am I missing anything here. pls advise. Please note am a newbie when it comes to streaming.
Thanks in advance.

Why do you think a different version of anything would improve the performance of IPTV when IPTV is pretty poor to begin with?

Whilst apps & dependencies enable the use of technologies such as IPTV performance will primarily always be down to the source of the stream and the Network it is being delivered via.

I would not therefore, expect so see any significant change just because of using more up-to-date versions of apps & dependencies.

 

[danny187]

Stream type and using ServiceApp can help with IPTV on enigma2.

OpenPLI IMO plays IPTV the smoothest, i.e less stutters but any OpenATV is fine also.

 

[physk]

Sorry to be a noob guys and i did try to search the answer. Are any of the TenBelow images clone safe, i have a vu solo 3.2

 

[danny187]

Sorry to be a noob guys and i did try to search the answer. Are any of the TenBelow images clone safe, i have a vu solo 3.2

I do not think these are "clone-safe" maybe worth checking clone image section or for your model.

I may be wrong though, but sure @Ten Below will confirm.

 

[Chrisire]

Any reason why in my epg its set to 8 columns but showing 10,no matter what number i set it to there is still 10...

 

[Ten Below]

Any reason why in my epg its set to 8 columns but showing 10,no matter what number i set it to there is still 10...

Changing the skin will solve this, however this build is well overdue for an update as things like epg importer now require an update to function properly.

 

[Ten Below]

Build Updated 29/11/17



Softcam feed repaired image & addons updated. Due to the large amount of updates (250+) a reflash is recommended, settings backups can be restored.

 

[adam59]

good job
Ten Below

 

[Ten Below]

Very good job Ten Below but i wish a image with Media Portal and ALL features like m3u list and Greyzone and porno sites enabled. There are many images but i have only find one old Open Atv 6.1 with it. Hmmm strange isn't it ? You coder must have it more easy to fix this because the user must use telnet and do so and so and so. Why not fix all from beginning. Plug and Play you know

A lot of people dont want the porn if they use media portal so guess thats why they keep them separate, perhaps somebody could do a backup image containing what you are looking for.

 

[DirtyDonki]

wheelchair uz

 

[gizmo1962]

many thanks for this build i am trying this on a meelo se but when i push the tv guide button nothing happens is there any way to get the tv guide working buy pushing tv guide on remote thanks

 

[DirtyDonki]

Should work out of the box but if not, as you suggest, then remap the keys. There should be an option to do so under the setup menu either under Gui (User Interface) or System.

Else install Multiquickbutton from the feeds and remap using that till your hearts content.

 

[Ten Below]

many thanks for this build i am trying this on a meelo se but when i push the tv guide button nothing happens is there any way to get the tv guide working buy pushing tv guide on remote thanks

It does on my original Solo2 but like DD says you can map again using button setup or hotkey in the user interface menu.

 

[chris0200]

Hi just updated from 6.0 two probs you may be able to help with:
TV button will not bring up bouquets for some reason, I have tried resetting to something else that work fine, then set back to bouquets still does not work?
OPENVPN also giving problems, reporting that "whilst feeds checked", then "sorry feeds down please check later".

Any help appreciated.

 

[Ten Below]

Hi just updated from 6.0 two probs you may be able to help with:
TV button will not bring up bouquets for some reason, I have tried resetting to something else that work fine, then set back to bouquets still does not work?

The tv button has not been altered on this or the 6.0 build when in channel list the blue button will bring up bouquets which is what i normally use.

OPENVPN also giving problems, reporting that "whilst feeds checked", then "sorry feeds down please check later".
Any help appreciated.

Feeds are online so there should not be any problems but have attached the version from the feeds for you. (For Solo2)

 

[chris0200]

The tv button has not been altered on this or the 6.0 build when in channel list the blue button will bring up bouquets which is what i normally use.

Feeds are online so there should not be any problems but have attached the version from the feeds for you. (For Solo2)

Weird, also noticed I had two -24 buttons in the epg and no timer option, sorted that one. Still no joy getting the TV button to work so just using the up/down toggle.

Not sure why not connecting as other things from the net are working, not to worry though as used the file you supplied and all is well again.

Many thanks

 

[Ten Below]

Weird, also noticed I had two -24 buttons in the epg and no timer option, sorted that one. Still no joy getting the TV button to work so just using the up/down toggle.

Not sure why not connecting as other things from the net are working, not to worry though as used the file you supplied and all is well again.

Many thanks

I will load it over the weekend & have another look buddy, you can change +24 -24 by going to Menu >Setup >EPG >GEPG Settings.

 

[gizmo1962]

hi many thanks for your help and advice it worked a treat

 

[Ten Below]

Just installed the build,didn't change anything but they are not there.

Possibly you are using service reference (SRP) picons, try adding a service named (SNP) set to your picon folder this will not affect your current set.

 

[unisat]

Am an owner of Vu+Ultimo 4K. I use IPTV extensively. Tried numerous images and found the best image for IPTV is Openatv 6.1.
I was attracted by your Custom Build openatv 6.1 especially because it has GStreamer 1.13.0. Installed your custom build image hoping to see the impact of the GSteamer 1.13.0 on IPTV performance on the device. I can not see any difference between IPTV performance using your custom Build image and the original Openatv 6.1. Am I missing anything here. pls advise. Please note am a newbie when it comes to streaming.
Thanks in advance.

 

[DirtyDonki]

Am an owner of Vu+Ultimo 4K. I use IPTV extensively. Tried numerous images and found the best image for IPTV is Openatv 6.1.
I was attracted by your Custom Build openatv 6.1 especially because it has GStreamer 1.13.0. Installed your custom build image hoping to see the impact of the GSteamer 1.13.0 on IPTV performance on the device. I can not see any difference between IPTV performance using your custom Build image and the original Openatv 6.1. Am I missing anything here. pls advise. Please note am a newbie when it comes to streaming.
Thanks in advance.

Why do you think a different version of anything would improve the performance of IPTV when IPTV is pretty poor to begin with?

Whilst apps & dependencies enable the use of technologies such as IPTV performance will primarily always be down to the source of the stream and the Network it is being delivered via.

I would not therefore, expect so see any significant change just because of using more up-to-date versions of apps & dependencies.

 

[danny187]

Stream type and using ServiceApp can help with IPTV on enigma2.

OpenPLI IMO plays IPTV the smoothest, i.e less stutters but any OpenATV is fine also.

 

[physk]

Sorry to be a noob guys and i did try to search the answer. Are any of the TenBelow images clone safe, i have a vu solo 3.2

 

[danny187]

Sorry to be a noob guys and i did try to search the answer. Are any of the TenBelow images clone safe, i have a vu solo 3.2

I do not think these are "clone-safe" maybe worth checking clone image section or for your model.

I may be wrong though, but sure @Ten Below will confirm.

 

[Chrisire]

Any reason why in my epg its set to 8 columns but showing 10,no matter what number i set it to there is still 10...

 

[Ten Below]

Any reason why in my epg its set to 8 columns but showing 10,no matter what number i set it to there is still 10...

Changing the skin will solve this, however this build is well overdue for an update as things like epg importer now require an update to function properly.

 

[Ten Below]

Build Updated 29/11/17



Softcam feed repaired image & addons updated. Due to the large amount of updates (250+) a reflash is recommended, settings backups can be restored.

 

[adam59]

good job
Ten Below

 

[Ten Below]

Very good job Ten Below but i wish a image with Media Portal and ALL features like m3u list and Greyzone and porno sites enabled. There are many images but i have only find one old Open Atv 6.1 with it. Hmmm strange isn't it ? You coder must have it more easy to fix this because the user must use telnet and do so and so and so. Why not fix all from beginning. Plug and Play you know

A lot of people dont want the porn if they use media portal so guess thats why they keep them separate, perhaps somebody could do a backup image containing what you are looking for.

 

[DirtyDonki]

wheelchair uz

 

[gizmo1962]

many thanks for this build i am trying this on a meelo se but when i push the tv guide button nothing happens is there any way to get the tv guide working buy pushing tv guide on remote thanks

 

[DirtyDonki]

Should work out of the box but if not, as you suggest, then remap the keys. There should be an option to do so under the setup menu either under Gui (User Interface) or System.

Else install Multiquickbutton from the feeds and remap using that till your hearts content.

 

[Ten Below]

many thanks for this build i am trying this on a meelo se but when i push the tv guide button nothing happens is there any way to get the tv guide working buy pushing tv guide on remote thanks

It does on my original Solo2 but like DD says you can map again using button setup or hotkey in the user interface menu.

 

[chris0200]

Hi just updated from 6.0 two probs you may be able to help with:
TV button will not bring up bouquets for some reason, I have tried resetting to something else that work fine, then set back to bouquets still does not work?
OPENVPN also giving problems, reporting that "whilst feeds checked", then "sorry feeds down please check later".

Any help appreciated.

 

[Ten Below]

Hi just updated from 6.0 two probs you may be able to help with:
TV button will not bring up bouquets for some reason, I have tried resetting to something else that work fine, then set back to bouquets still does not work?

The tv button has not been altered on this or the 6.0 build when in channel list the blue button will bring up bouquets which is what i normally use.

OPENVPN also giving problems, reporting that "whilst feeds checked", then "sorry feeds down please check later".
Any help appreciated.

Feeds are online so there should not be any problems but have attached the version from the feeds for you. (For Solo2)

 

[chris0200]

The tv button has not been altered on this or the 6.0 build when in channel list the blue button will bring up bouquets which is what i normally use.

Feeds are online so there should not be any problems but have attached the version from the feeds for you. (For Solo2)

Weird, also noticed I had two -24 buttons in the epg and no timer option, sorted that one. Still no joy getting the TV button to work so just using the up/down toggle.

Not sure why not connecting as other things from the net are working, not to worry though as used the file you supplied and all is well again.

Many thanks

 

[Ten Below]

Weird, also noticed I had two -24 buttons in the epg and no timer option, sorted that one. Still no joy getting the TV button to work so just using the up/down toggle.

Not sure why not connecting as other things from the net are working, not to worry though as used the file you supplied and all is well again.

Many thanks

I will load it over the weekend & have another look buddy, you can change +24 -24 by going to Menu >Setup >EPG >GEPG Settings.

 

[gizmo1962]

hi many thanks for your help and advice it worked a treat