- Messages
- 7,936
- Joined
- Sep 9, 2014
- Reaction score
- 7,766
- Points
- 628
Here is a freshly built version, i will update post #1 if you have better luck with it.
Attachments
-
81 MB Views: 85
Thanks for your feedback MatMusalen, can you confirm kodi is now working for the SoloSE with the version attached tp post #41?Hello friends. I have finally been able to install the image of the last post of OpenPli 5 in my Vu + SoloSE. It is connected to an antenna of 80 cm equipped with engine Stab HH120. I connect with the DCC 2.96 FTP software and administer programs with DogSetting (he has always done very well).
Charging from USB does not give problems or configuration. The cam 2.2.1 is what I do better. The plugin loaded without problems, including KODI (which must then be set). However the problem has arisen me that once tuned several satellites, to download the DogSetting, make bouquets and reload, the deco does not tune the channel. The shows on screen, but not the tune. If retuning again, respects the bouquets and as if the tune well. The same happens if you load another list of programs to be retuning back to the satellites. I have not found other problems and I think it works fine, except as indicated for the channel lists. I hope my experience helps other forum members and thank you very much to the authors of this firmware.
(sorry for my english....)
I can also confirm that Kodi is working on SoloSE, with this release. :dancehappy:
But i have probs with locking on channels. I can only watch, auto or manual scanned channels.
If i transfer or install my preferred bouquets, i get error.
I have multiswitch 1.1 with 4 sat's. I have on all sats signals, tested with SignalFinder.
View attachment 12035 View attachment 12036 View attachment 12037
Thankyou both for the time you have taken to test & more importantly the feedback given, this is exactly the reason we do not have official OpenPLi 5.0 yet & i will now report your tests & to those working on the image then build again once this is resolved, i have no idea how to fix this but the info you have wil go a long way towards solving problems.Hello Friends :Hi2:.
Indeed any eventuality (eg blocking a streaming Kodi, etc ...) must be retune all channels. By the way, thank you very much for the indication of e-Channelizer. It's a great program and works perfectly. However, despite having all the correct settings saved with the E-Channelizer, although it retype all that good configuration in the deco, the problem is not resolved and it's back to retune.
Greetings to all.
I have just built this with the latest oscam see how you get on with it, install from telnet.openpli-enigma2-5-vusolo4k
been having a go at putting softcams on
crashes box or just don't install ? oscam-11272
But i shall keep going
No joy there Ten ?I have just built this with the latest oscam see how you get on with it, install from telnet.
Ok this is the first feeback ive had for the solo4k so will have a look at it through the week & build again, thanks for taking the time to try.No joy there Ten ?
also can't change date and time
every time i reboot or restart enigma
I get Thursday the 1st of January 1970
I,v reflashed 5 times ?
Just to let you knowOk this is the first feeback ive had for the solo4k so will have a look at it through the week & build again, thanks for taking the time to try.
Thanks i did not find time to try building again this week but will try asap ricki.Sorry to say download of cams doesn t work green screan.
Solo4K build
No these were built using only the default options for Pli next-master & mx3L's meta-vuplus layer.Are this bild based on gcc 6.1?
Thanks for your feedback MatMusalen, can you confirm kodi is now working for the SoloSE with the version attached tp post #41?Hello friends. I have finally been able to install the image of the last post of OpenPli 5 in my Vu + SoloSE. It is connected to an antenna of 80 cm equipped with engine Stab HH120. I connect with the DCC 2.96 FTP software and administer programs with DogSetting (he has always done very well).
Charging from USB does not give problems or configuration. The cam 2.2.1 is what I do better. The plugin loaded without problems, including KODI (which must then be set). However the problem has arisen me that once tuned several satellites, to download the DogSetting, make bouquets and reload, the deco does not tune the channel. The shows on screen, but not the tune. If retuning again, respects the bouquets and as if the tune well. The same happens if you load another list of programs to be retuning back to the satellites. I have not found other problems and I think it works fine, except as indicated for the channel lists. I hope my experience helps other forum members and thank you very much to the authors of this firmware.
(sorry for my english....)
I can also confirm that Kodi is working on SoloSE, with this release. :dancehappy:
But i have probs with locking on channels. I can only watch, auto or manual scanned channels.
If i transfer or install my preferred bouquets, i get error.
I have multiswitch 1.1 with 4 sat's. I have on all sats signals, tested with SignalFinder.
View attachment 12035 View attachment 12036 View attachment 12037
Thankyou both for the time you have taken to test & more importantly the feedback given, this is exactly the reason we do not have official OpenPLi 5.0 yet & i will now report your tests & to those working on the image then build again once this is resolved, i have no idea how to fix this but the info you have wil go a long way towards solving problems.Hello Friends :Hi2:.
Indeed any eventuality (eg blocking a streaming Kodi, etc ...) must be retune all channels. By the way, thank you very much for the indication of e-Channelizer. It's a great program and works perfectly. However, despite having all the correct settings saved with the E-Channelizer, although it retype all that good configuration in the deco, the problem is not resolved and it's back to retune.
Greetings to all.
I have just built this with the latest oscam see how you get on with it, install from telnet.openpli-enigma2-5-vusolo4k
been having a go at putting softcams on
crashes box or just don't install ? oscam-11272
But i shall keep going
No joy there Ten ?I have just built this with the latest oscam see how you get on with it, install from telnet.
Ok this is the first feeback ive had for the solo4k so will have a look at it through the week & build again, thanks for taking the time to try.No joy there Ten ?
also can't change date and time
every time i reboot or restart enigma
I get Thursday the 1st of January 1970
I,v reflashed 5 times ?
Just to let you knowOk this is the first feeback ive had for the solo4k so will have a look at it through the week & build again, thanks for taking the time to try.
Thanks i did not find time to try building again this week but will try asap ricki.Sorry to say download of cams doesn t work green screan.
Solo4K build
No these were built using only the default options for Pli next-master & mx3L's meta-vuplus layer.Are this bild based on gcc 6.1?